Brother International HL-1070 Technical Reference - Page 66
Esc$=chr$27, For I=33 To 127, Lprint Chr$i, Lprint, Pcl - 46
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
2001/10/02 • The selection will apply to whichever font you are currently specifying (primary or secondary). • If the printer doesn't have the specified size font, the next largest size font is used. If the printer doesn't have a larger sized font, the next smallest one is used. • This value is ignored by the printer when a proportional spaced font is selected. 10 REM ****** CHARACTER PITCH SELECTION ****** 20 ESC$=CHR$(27) 30 WIDTH "LPT1:",255 40 REM --- SELECT A 10 CPI PITCH FONT ---50 LPRINT ESC$+"(s10H"; 60 FOR I=33 TO 127 70 LPRINT CHR$(I); 80 NEXT 90 LPRINT 100 REM --- SELECT A 12 CPI PITCH FONT --110 LPRINT ESC$+"(s12H"; 120 FOR I=33 TO 127 130 LPRINT CHR$(I); 140 NEXT 150 LPRINT 160 REM --- PAPER EJECT --170 LPRINT CHR$(12); 180 END 5.2.8. Selecting the height Esc(s#V (27)(40)(115)#(86) # This command designates the height of the primary font. Esc)s#V (27)(41)(115)#(86) # • This command designates the height of the secondary font. • # is the size in points (1/72") from 0.25 to 999.75 in 0.25 increments. • This value is ignored by the printer when a fixed-spaced scalable font is selected. 5.2.9. Scaling the scalable fonts vertically or horizontally EscCR!#H (27)(13)(33)#(72) # This command designates the height of the scalable fonts. EscCR!#V (27)(13)(33)#(86) # This command designates the width of the scalable fonts. • # can be from 0.25 ~ 3.00 in 0.01 increments. • # value is set to 0.25 when # is specified less than 0.25, and # value is set to 3.00 when # is specified bigger than 3.00. • The value set by this command is initialized when the emulation is changed, a printer Reset, Test Print or Macro overlay is executed. 5.2.10. Selecting the style Esc(s#S (27)(40)(115)#(83) # • This command designates the style of the primary font. Esc)s#S (27)(41)(115)#(83) # • This command designates the style of the secondary font. • If you select a particular style (for example upright condensed outline) the command will only take effect if the font is available in one of the three font locations. CHAPTER 2 "PCL" - 46