Brother International HL-1070 Technical Reference - Page 274
Select Near Letter Quality or Draft, Cancel MSB setting
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
2001/10/02 Set data MSB to 1 Esc> (27)(62) • This command enables you to set the most significant bit of incoming data bytes to 1. • This command does not affect data comprising a graphics image or data that defines a downloadable character. LPRINT CHR$(27); CHR$(62); 'Set MSB to 1 Cancel MSB setting Esc# (27)(35) This command cancels the two commands that set the most significant bit of incoming data bytes (Esc = and Esc >). LPRINT CHR$(27); CHR$(35); 'Cancel MSB setting Select Near Letter Quality or Draft Escxn (27)(120)n n The printer ignores this command. Select / cancel half speed mode Escsn (27)(115)n n The printer ignores this command. Enable printer DC1 (17) The printer ignores this command. Disable printer DC3 (19) The printer ignores this command. Initialize printer Esc@ (27)(64) • This command resets the printer. • All remaining data is printed out and the printer default settings are restored. LPRINT CHR$(27); CHR$(64); 'Printer reset Reset printer / change emulation mode EscCR (27)(13)mode mode • This command enables you to switch emulation mode or to reset the printer. • Change emulation mode by setting mode to the appropriate letter or pair of letters. Set mode to 'D' to switch to Diablo mode, 'H' to switch to LaserJet mode, 'I' to switch to IBM Proprinter XL mode, 'AB' to switch to BR-Script Batch mode, 'AI' to switch BR-Script Interactive mode, 'GL' to switch to HP-GL mode. • If you set mode to 'E' in Epson FX-850 mode , a printer reset is performed. • If you set mode to 'FD', to reset the printer to its factory default settings, LaserJet mode (the factory default emulation mode) is selected and the LaserJet factory default environment is restored. For a list of the factory default settings see the sub-section "Factory default environment" in Chapter 2 "PCL" of this manual. • On receiving this command the printer prints any remaining data and performs a page eject (unless the current page is blank). The newly selected emulation mode's default settings come into effect, except when mode is set to 'FD'. LPRINT CHR$(27); CHR$(13); CHR$(73); 'Change to IBM Proprinter mode CHAPTER 6 EPSON - 11