Brother International HL-1070 Technical Reference - Page 141
Push/Pop Palette, Command
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
2001/10/02 3.6. Push/Pop Palette Command ESC*p#P (27)(42)(112)#(80) # = 0 * Push palette = 1 Pop palette * Default value = 0 # • The value of 0 pushes the current palette onto the palette stack. This command does not affect the current palette. • The value of 1 pops the palette from the top of the palette stack and replacesthe current palette with it. • If the Pop Palette command is executed without a Push palette having first having been executed, it is ignored. • The palette stack is controlled as a First In Last Out stack. • The parameters below are pushed to the palette stack; w Color Mode (Simple Color / PCL Color Mode) w Parameters to be set by the Set PCL Color Setting command w Encoding Mode (mode 0, 1, 2, 3) w Bits / index w Bits / value #1 w Bits / value #2 w Bits / value #3 w Black and White Reference w Parameter of Render Algorithm w Parameter of Gamma Correction w Color Palette w Dither to be downloaded by the Download Dither Matrix command w Pen Width (HP-GL/2) • The data below is pushed to the palette stack; w Colors to be selected by the Select Color command w Colors to be selected by the Set #1, #2, #3 command w Monochrome Print Mode CHAPTER 3 "PCL5C" - 11
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/141.png)