Brother International HL-1070 Technical Reference - Page 431
COMMAND REFERENCE LIST, Commands Descriptions
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 431 highlights
3. COMMAND REFERENCE LIST 2001/10/02 This section describes the specific commands as listed below used to support the functions of the Mailbox unit. 1) PJL output tray & mode setting 2) PJL mailbox protection & bin number setting 3) PJL avoidance of output bin full 4) PCL output tray setting 5) PS output tray & mode setting 6) PS mailbox protection & bin number setting For the details on each command, refer to the following sections. 3.1. Commands Descriptions 3.1.1. PJL output tray & mode setting Format @PJL SET/DEFAULT OUTBIN=TrayName Parameter TrayName* • UPPER: Select the printer face-down output tray. • OPTIONALOUTPUTBIN1: Select the #1 bin of the Mailbox unit. • OPTIONALOUTPUTBIN2: Select the #2 bin of the Mailbox unit. • OPTIONALOUTPUTBIN3: Select the #3 bin of the Mailbox unit. • OPTIONALOUTPUTBIN4: Select the #4 bin of the Mailbox unit. • OPTIONALOUTPUTBIN5: Select the #5 bin of the Mailbox unit. (except HL-3260) • OPTIONALOUTPUTBIN6: Select the #6 bin of the Mailbox unit (except HL-3260) • OPTIONALOUTPUTBIN7: Select the #7 bin of the Mailbox unit. (except HL-3260) • OPTIONALOUTPUTBIN8: Select the #8 bin of the Mailbox unit. (except HL-3260) • OPTIONALOUTPUTBIN9: Select the #9 bin of the Mailbox unit. (except HL-3260) • OPTIONALOUTPUTBIN10: Select the #10 bin of the Mailbox unit. (except HL-3260) • ALLSTACKER: Select the stacker function. ** • ALLSORTER: Select the sorter function. ** * = The tray names are compatible with the HP tray naming. ** = These are unique tray names (parameters) for the HL-2060/2460/3260. Default = ALLSTACKER Explanation • This command selects the specified output tray and output mode, trays defined as Mailboxes are numbered from the bottom of the unit upwards • This command is ignored when there is no specified tray. • The ALLSTACKER and ALLSORTER parameters are executed for all output trays other than the ones which are defined and protected as mailboxes. (Refer to Section 3.1.2 'PJL mailbox protection & tray number setting'.) • The difference between the SET and DEFAULT selection and the effective period of this setting follow the PJL specifications. APPENDIX D REFERENCE LIST OF MX-2000/4000/5000 SERIES UNIQUE COMMANDS - 5
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/431.png)