Brother International HL-1070 Technical Reference - Page 92
Set area fill identity, PCL - 72
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
2001/10/02 For example Pattern Source image (Source image is transparent) Destination image With transparent pattern With opaque pattern Possible results 6.1.3. Set area fill identity Esc*c#G (27)(42)(99)#(71) # • This command sets the pattern ID of a shading tone, a fill pattern or a user-defined pattern for subsequent selection with the Set Pattern Type command. • # 1 ~ 100 specify the percentage of a gray scale. • # 1 ~ 6 select a fill pattern. • # 1 ~ 32767 select a user-defined pattern. • You can specify a gray scale tone from 1 to 100. To use the specified tone for shading you must then select one of the two gray scale pattern options with the Set Pattern Type command. For example Fill patterns # = 1 # = 2 # = 3 # = 4 # = 5 # = 6 CHAPTER 2 "PCL" - 72
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/92.png)