Brother International HL-1070 Technical Reference - Page 432

2001/10/02 3.1.2. PJL mailbox protection & bin number setting Format @PJL SET/DEFAULT MAILBOXPROTECT=TrayNumber Parameter TrayNumber • Lower unit: • Lower unit + Upper unit: #1 to 4 from bottom to top Default = 0 #1 to 5 from bottom to top #1 to 10 from bottom to top Explanation • This command sets the bins with numbers larger than the TrayNumber specified as mailbox use only. They cannot then be used for either stacker or sorter functions. • If the bin number is set to 0, the mailbox protection is released, then all bins can be used for stacker and sorter functions. • If the bin number is set out of the effective range, this command is ignored. Setting type • MX not installed • Lower unit installed • Lower & upper unit installed Effective range 0 0, 1 ∼ 5 0, 1 ∼ 10 Setting type • MX not installed • MX installed Effective range 0 0, 1 ∼ 4 • The difference between the SET and DEFAULT selection and the effective period of this setting follow the PJL specifications. 3.1.3. PJL avoidance of mailbox bin full Command @PJL SET/DEFAULT AVOIDMAILBOXFULL=ON/OFF Parameter ON/OFF • OFF: Paper is ejected to the printer face-down output tray when the specified tray is full. • ON: Paper is not ejected to the printer face-down output tray even when the specified tray is full. Default = OFF Explanation • When paper is ejected into a bin specified by a setting command which limits the bin selection, this command selects whether to eject automatically paper to the printer face-down output tray or not when the specified bin is full. • The difference between the SET and DEFAULT selection and the effective period of this setting follow the PJL specifications. APPENDIX D REFERENCE LIST OF MX-2000/4000/5000 SERIES UNIQUE COMMANDS - 6