Brother International HL-1070 Technical Reference - Page 283

2001/10/02 • Selecting either superscript or subscript mode cancels double-height printing mode. • You can cancel either superscript or subscript mode with the Esc T command. LPRINT CHR$(27); CHR$(83); CHR$(0); 'Turn on superscript mode Cancel superscript / subscript mode EscT (27)(84) • This command cancels superscript or subscript printing mode. • Subsequent text is printed using normal characters. LPRINT CHR$(27); CHR$(84); 'Turn off superscript mode Select / cancel double-height printing Escwn (27)(119)n n • This command turns double-height printing on or off. • If n is set to 1 subsequent text is printed using double-height characters. The line space setting is doubled. • If n is set to 0 subsequent text is printed using normal sized characters. The previous line spacing is restored. • When you specify a value for n you may also use the character codes for '0' and '1' (48 and 49) instead of 0 and 1. • You cannot use superscript, subscript or condensed printing modes in conjunction with doubleheight printing. If you try to select any of these three modes while in double-height printing the command will be ignored. LPRINT CHR$(27); CHR$(119); CHR$(1); 'Set double-height printing mode Select / cancel underline mode Esc-n (27)(45)n n • This command turns character underlining on or off. • If n is set to 1 subsequent text is printed underlined. All characters, including space characters, are underlined with a continuous line. • Horizontal tabbed spaces are never underlined. • If n is set to 0 subsequent text is not underlined. • When you specify a value for n you may also use the character codes for '0' and '1' (48 and 49) instead of 0 and 1. LPRINT CHR$(27); CHR$(45); CHR$(1); 'Underline following text Select printing mode Esc!n (27)(33)n n • This command allows you to select a combination of printing modes with just one command. • The various modes are weighted as shown. Add the numbers that correspond to each mode you require and set n to the total. 10 characters per inch 0 12 characters per inch 1 Proportional spacing 2 Condensed mode 4 Emphasized mode 8 Double-strike mode 16 Double-width mode 32 Italic printing 64 Underline mode 128 • Double-strike and emphasized modes are identical. • Proportional spacing overrides either character pitch setting (10 cpi or 12 cpi). • Proportional spacing and condensed mode cannot be combined. Proportional spacing has precedence. LPRINT CHR$(27); CHR$(33); CHR$(138); 'Proportionally space, emphasize & underline following text. CHAPTER 6 EPSON - 20