Brother International HL-1070 Technical Reference - Page 439
Commands Descriptions, PJL output tray, Format, Parameter, Explanation, Command
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 439 highlights
2001/10/02 3.1. Commands Descriptions 3.1.1. PJL output tray Format @PJL SET/DEFAULT OUTBIN=TrayName Parameter TrayName* • FINISHER: Select the tray of the Finisher/Stapler unit Default = ALLSTACKER Explanation • This command selects the Finisher/Stapler unit. • This command is ignored when the Finisher/Stapler unit is not available. • The difference between the SET and DEFAULT selection and the effective period of this setting follow the PJL specifications. 3.1.2. PCL output tray Command Esc&l#G (27)(38)(108)#(71) # Parameter # denotes the output tray. • 100: Select the Finisher/Stapler unit. Default = 1 Explanation • This command selects the Finisher/Stapler unit. • This command is ignored when the Finisher/Stapler unit is not available. • The PJL OUTBIN command is ignored when this command is executed. 3.1.3. PS output tray Command setpagedevice Parameter # • 3: Select the Finisher/Stapler unit. Default = 0 Explanation • This command selects the Finisher/Stapler unit. • This command is ignored when the Finisher/Stapler unit is not available. setpagedevice APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 4
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/439.png)