Brother International HL-1070 Technical Reference - Page 222
Variables for HL-1050/1070/1250/1270N/1450/1470N/P2500/1670N/3260N/2460 - hl toner
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
2001/10/02 6.2. Variables 6.2.1. Variables for HL-1050/1070/1250/1270N/1450/1470N/P2500/1670N/3260N/2460 1. General PJL Environment Variables The PJL environment variables which are not printer language-specific are listed in the following table. When using these variables, do not use LPARM. Variables COPIES MANUALFEED ECONOMODE ECONOLEVEL PERSONALITY INPUTBUF XOFFSET Description Number of uncollated copies for each page of the job. Feeds the paper from manual feed slot. Turn the economy mode (toner saving mode) ON or OFF. Selects the toner saving level from 1 (high) to 3 (low). Sets the emulation mode. Sets the receiving buffer size value. Sets the X offset ( horizontal offset ) value. Sample Value Range 1 to 200 (HL-1050/1070) 1 to 99 (HL1250/1270N/1450/1470N/P2500) 1 to 999 (HL-1670N/3260N/2460) ON or OFF ON or OFF 1 to 3 0 to 3 (HL-1670N/3260N/HL-2460) AUTO, PCL, IBM, EPSON, POSTSCRIPT (All models) HPGL (HL-3260N/2460) 1 to 15 (HL-2460) -500 to 500 dots (HL1050/1070/1250/1270N/1450/1470N/ P2500/1670N/2460 YOFFSET AUTOCONT TIMEOUTEMU PRIORITY HPFSEL AUTOFF TIMEOUTFF TIMEOUT CDCCHIGH Sets the Y offset ( vertical offset ) value. Auto Continue Mode Sets the time-out value for automatic emulation switching. Sets the priority between EPSON or IBM for automatic emulation switching. Sets the auto FF setting to ON or OFF. Sets the timeout value for auto FF. Sets the timeout value for Automatic interface switching Sets the high-speed transfer mode of the Centronics interface to ON or OFF. -104 to 500 (HL-3260N) -500 to 500 dots ON or OFF 1 to 99 seconds EPSON or IBM ALL, LJ4 (HL-2460) ON or OFF 1 to 99 seconds 1 to 99 seconds ON or OFF (HL1050/1070/1250/1270N/1450/1470N/ P2500) DTRCTRL AUTOSLEEP TIMEOUTSLEEP IBMCHARE1 Selects when DTR becomes low. 0 = the printer is turned off-line by the SEL switch, the input buffer is full, or when a printer error occurs. 1 = the printer is turned off-line by the SEL switch or when a printer error occurs. 2 = the printer is turned off-line by the SEL switch. Sets the automatic sleep mode ON or OFF. Sets the timeout value for automatic sleep mode. 0 to 2 (HL1050/1070/1250/1270N/1450/1470N/ P2500/1670N) ON or OFF 1 to 00 minutes 1 to 99 minutes (HL-1670N/2460) 1 to 240 minutes (HL-3260N) BETA or ESSZET CHAPTER 5 PJL - 18