Brother International HL-1070 Technical Reference - Page 440
PJL SET/DEFAULT STAPLE, set device, PJL staple on/off, Format, Parameter, Explanation, Command
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 440 highlights
2001/10/02 3.1.4. PJL staple on/off Format @PJL SET/DEFAULT STAPLE=StapleName Parameter StapleName* • UPPER LEFT: • UPPER RIGHT: • LOWER LEFT: • LOWER RIGHT: • OFF: Select the upper left of the Finisher/Stapler unit Select the upper right of the Finisher/Stapler unit Select the lower left of the Finisher/Stapler unit Select the lower right of the Finisher/Stapler unit Default = UPPER LEFT Explanation • This command selects the staple. • This command is ignored when the Finisher/Stapler unit is not available. • The difference between the SET and DEFAULT selection and the effective period of this setting follow the PJL specifications. 3.1.5. PS staple on/off Command setpagedevice Parameter # • 0: Select off of the Finisher/Stapler unit. • 1: Select the upper left of the Finisher/Stapler unit. • 2: Select the upper right of the Finisher/Stapler unit. • 3: Select the lower left of the Finisher/Stapler unit. • 4: Select the upper right of the Finisher/Stapler unit. Default = 0 Explanation • This command selects the staple. • This command is ignored when the Finisher/Stapler unit is not available. setpagedevice APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 5
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/440.png)