Brother International HL-1070 Technical Reference - Page 309
Underline mode, Continuous overline mode, Select double-height / double-width mode
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
2001/10/02 Underline mode Esc-n (27)(126)n n • This command turns character underlining on or off. • If n is set to 1 subsequent text is underlined. • Horizontal tab spaces are not underlined irrespective of whether underlining mode is on or off. • If n is set to 0 subsequent text is not underlined. LPRINT CHR$(27); CHR$(45); CHR$(1); 'Underline following text Continuous overline mode Esc_n (27)(95))n n • This command turns character overline printing on or off. • If n is set to 1 subsequent text is printed with a continuous line above it. • Horizontal tab spaces are not printed overlined irrespective of whether overline printing mode is on or off. • If n is set to 0 subsequent text is not printed with an overline. LPRINT CHR$(27); CHR$(95); CHR$(1); 'Print following text with an overline Select double-height / double-width mode Esc[@n1n2n3n4n5n6 (27)(91)(64)n1n2n3n4n5n6 n1n2n3n4n5n6 • This command enables you to select single or double line spacing and single or double character height and width. • n1 should be set to 4 and n2,n3 and n4 to 0. • To set double line spacing and select double-height characters set n5 to 34. • To set double line spacing and select normal height characters set to n5 to 33. • To set single line spacing and select double-height characters set to n5 to 18. • To set single line spacing and select normal height characters set n5 to 17. • To select double-width characters set n6 to 2. • To select single-width characters set n6 to 1. LPRINT CHR$(27); CHR$(91); CHR$(64); CHR$(4); CHR$(0); CHR$(0); CHR$(0); CHR$(34); CHR$(1); 'Set double line spacing and print doubleheight, double-width characters. Select character from the All Character Code table Esc\n1n2 (27)(92)n1n2 n1n2 • This command enables you to print characters from the All Character Code table. • n1 and n2 specify the number of characters to be printed. • The number of characters printed is 256*n2+n1. • Control codes included in the character data are not executed. LPRINT CHR$(27); CHR$(92); CHR$(64); CHR$(1); CHR$(65); CHR$(66); CHR$(67); CHR$(68); CHR$(69); 'Print 320 characters starting ABCDE... CHAPTER 7 IBM PROPRINTER - 16
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/309.png)