Brother International HL-1070 Technical Reference - Page 275
set up, User reset, Paper Input Control, Enable out-of-paper sensor, Set length
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
2001/10/02 User reset EscCR!#R (27)(13)(33)#(82) # • # = 0, the printer restores to the current user setting. • # = 1, the printer restores to user settings 1. • # = 2, the printer restores to user settings 2. Paper Input Control EscEMn (27)(25)n n n Value n =0 n =1 n =2 n =3 n =4 n =5 n =R HL-1660e/2060/2400C/2400Ce/3400CN/3260N/2460 Initialize the feeder mode. Feed from the MP tray. Feed from Tray 1. Feed from Tray 2. Feed from Tray 3. Feed from Tray 4. Eject paper. n Value n =0 n = 1/2 n =R HL-1050 Initialize the feeder mode. Feed from the tray. Eject paper. n Value HL-1250/1270N/1450/1470N/P2500/1650/1670N n =0 n =1 n =2 n =R Initialize the feeder mode. Feed from the Tray 1. Feed from the Tray 2. Eject paper. Enable out-of-paper sensor Esc9 (27)(57) The printer ignores this command. Disable out-of-paper sensor Esc8 (27)(56) The printer ignores this command. 6.2. Page set up Set page length EscCn (27)(67)n n This command sets the page length in lines. or EscCNULn (27)(67)(00)n n • This command sets the page length in inches. • The top of form position is set to be the current line. • n is the number of lines that make up one page, or the length of the page in inches, according to which form of the command is used. • If the first form of the command is used (n = the number of lines in the page) the current line spacing setting is used to determine the length of the page. • If the first form of the command is used, n must be in the range 1 to 127. CHAPTER 6 EPSON - 12
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/275.png)