Brother International HL-1070 Technical Reference - Page 278
Select 7/72 line spacing, Perform n/216 line feed, <1Bh><33h>n
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
2001/10/02 Select 7/72" line spacing Esc1 (27)(49) • This command sets the line spacing to 7/72". All subsequent line feed operations will move the print position 7/72" down the page. • Since the printer resolution is 600 dots per inch the line spacing will not be exactly 7/72". LPRINT CHR$(27); CHR$(49); 'Set line spacing to 7/72". Select n/72" line spacing EscAn (27)(65)n n • This command sets the line spacing to n/72". All subsequent line feed operations will move the print position n/72" down the page. • Since the printer's resolution is 600 dots per inch the line spacing will not be exactly n/72". • n must be in the range 1 to 85. • If n is outside the range 1 to 85 the default line spacing, 1/6" is selected. LPRINT CHR$(27); CHR$(65); CHR$(10); 'Set line spacing of 10/72". Select n/216" line spacing Esc3n (27)(51)n n • This command sets the line spacing to n/216". All subsequent line feed operations will move the print position n/216" down the page. • Since the printer's resolution is 600 dots per inch the line spacing will not be exactly n/216". • n must be in the range 1 to 255. LPRINT CHR$(27); CHR$(51); CHR$(25); 'Select line spacing of 25/216". Perform n/216" line feed EscJn (27)(74)n n • This command performs a single line feed, moving the print position down the page by n/216". • This command does not perform a carriage return. • The current line spacing setting is not affected. • n must be in the range 0 to 255. • The actual vertical distance moved may not be exactly the distance you specify due to the printer's 600 dots per inch resolution. LPRINT CHR$(27); CHR$(74); CHR$(54); '1/4" line feed Perform n/216" reverse line feed Escjn (27)(106)n n This command performs a single reverse line feed, moving the print position up the page by n/216". • This command does not perform a carriage return. • The current line spacing setting is not affected. • n must be in the range 0 to 255. • The actual vertical distance moved may not be exactly the distance you specify due to the printer's 600 dots per inch resolution. LPRINT CHR$(27); CHR$(106); CHR$(108); '1/2" line feed CHAPTER 6 EPSON - 15