Brother International HL-1070 Technical Reference - Page 402
MEMORY FULL, CARD1 W ERROR, DEVICE1 W ERROR, SERVICE E74, ESC CR ! 12349F ID2byte, Save data, Command
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
2001/10/02 3.4 Data 3.4.1 Save data Command ESC CR ! 12347F ID(2byte) size(4byte) data... Available Devices F, A, H Description This command saves data which is sent from the PC with the specified ID onto the device. If there is insufficient memory in the printer to store the data, a memory full error occurs. When the printer supports two or more storage devices, the command saves the data onto the device specified by the select storage device command. When only one device is enabled, the command saves onto that device. Error HL-1660e/2060/2400C: 34 MEMORY FULL 43 CARD1 W ERROR 43 CARD2 W ERROR HL-2400Ce/3400CN: 43 DEVICE1 W ERROR 43 DEVICE2 W ERROR 43 DEVICE3 W ERROR HL-2460/3260N: 43 CARD ERROR 43 HDD ERROR HL-1650/1670N: 43 SERVICE E74 3.4.2 Execute data Command ESC CR ! 12349F ID(2byte) Available Devices F, A, H Description This command executes the specified ID data. When the printer supports two or more storage devices, the command saves the data onto the device specified by the select storage device command. When only one device is enabled, the command saves onto that device. Error N/A APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 8
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/402.png)