Brother International HL-1070 Technical Reference - Page 164
Lprint Ip1500
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
2001/10/02 • With type 1 scaling you can specify the percentage of unused space that is to lie below, or to the left of, the isotropic area. • left specifies the percentage of unused space you want to lie to the left of the isotropic area and can be from 0 to 100. If you do not specify the value for left, it is automatically set to the default value = 50%. • bottom specifies the percentage of unused space you want to lie below the isotropic area and can be from 0 to 100. If you do not specify the value for bottom, it is automatically set to the default value = 50%. (10,10) P2 P2 (10,10) Extra space P1(0,0) SC 0,10,0,10,1,0,0 (0,10) Extra space P1 SC0,20,0,10,1,100,100 Extra space (10,10) P 2 Extra space P2 (20,10) P1 (10,0) P1(0,0) SC 0,10,0,10,1,100,100 SC 0,20,0,10,1,0,0 • You must either specify both left and bottom, or specify neither. However, the printer can only use one of these two parameters at a time, depending where the extra space is on a page. \ • If you do not specify a percentage for unused space to the left or at the bottom, the isotropic area is centred in the rectangle defined by P1 and P2. • Type 2 scaling (point factor scaling) specifies the ratio of graphics units to user units and sets user units coordinates for P1. • Xfactor specifies the number of graphics units that comprise a single user x-axis unit. • Yfactor specifies the number of graphics units that comprise a single user y-axis unit. • Valid values for Xfactor and Yfactor are real numbers. • An SC command remains in effect until another SC command is issued, until default settings are restored with the DF command or until the printer is initialized with an IN command. 10 '-Scale-' 20 WIDTH "LPT1:", 255 30 LPRINT CHR$(27); "E"; 40 LPRINT CHR$(27); "%0B"; 50 LPRINT "IN;SP1;" 60 '-- Anisotropic scaling -70 LPRINT "PA1500,6000;EA3500,8000;" 80 LPRINT "IP1500,6000,3500,8000;SC0,200,0,100,0;PA50,50;CI50;" 90 LPRINT "IN;PA1500,3000;EA3500,5000;" 100 LPRINT "IP1500,3000, 3500,5000;SC0,100,0,200,0;PA50,50;CI50;" 110 LPRINT"IN;PA1300,8200;DT#;LBAnisotropic scaling#"; 120 '--Isotropic scaling-130 'Left,Bottom= 0,0 140 LPRINT "PA4500,6000;EA6500,8000;" 150 LPRINT"IP4500,6000,6500,8000;SC0,200,0,100,1,0,0;PA50,50;CI50;" 160 'Left, Bottom = 100,100 170 LPRINT "IN;PA4500,3000;EA6500,5000;" 180 LPRINT"IP4500,3000,6500,5000;SC0,100,0,200,1,100,100;PA50,50;CI50;" 190 LPRINT "IN;PA4000,82;DT#;LBIsotrop00ic scaling#"; 200 LPRINT CHR$(27);"%0A"; 210LPRINT CHR$(27);"E"; 220 END CHAPTER 4 HP-GL/2 - 16