Brother International HL-1070 Technical Reference - Page 324
Box Drawing, 14. Line Block Drawing, 15. Expanded Character Data Start
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 324 highlights
2001/10/02 • When Code 128 Set A, Set B, or Set C is selected with the parameter "t12" or "12," "t13" or "T13," or "t14" or "T14" respectively: Code sets A, B and C are individually selectable. Set A encodes characters in the range Hex 00 to 5F. Set B encodes characters in the range Hex 20 to 7F. Set C encodes numeric pairs in the range 00 to 99. - Switching is allowed between the code sets by sending %A, %B, or %C. - FNC 1, 2, 3, and 4 are produced with %1, %2, %3, and %4. - The SHIFT code, %S, allows temporary switching (for 1 character only) between set A and set B and vice versa. - To print the "%" character, it must be sent twice. • When ISBN (EAN) is selected with the parameter "t130" or "T130": The rules are the same as for "t5" or "T5" • When the ISBN (UPC-E) is selected with the parameter "t131" or "T131": The rules are the same as for "t6" or "T6" • When EAN 128 set A, set B or set C is selected with the parameter "t132" or "T132," "t133" or "T133" or "t134" or "T134" respectively: Same rules apply as for "t12" or "T12," "t13" or "T13", or "t14" or "T14." 3.13. Box Drawing ESC i ... E (or e) "E" or "e" is a terminator. 3.14. Line Block Drawing ESC i ... V (or v) "V" or "v" is a terminator. 3.15. Expanded Character Data Start n = "l" or "L" Data that follows "l" or "L" is read in as expanded character data (or labeling data). Expanded character data must end with the " \ " code (5CH), which also terminates this command. To print the '\' character, you must input '\\'. CHAPTER 8 BAR CODE CONTROL - 9
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/324.png)