Brother International HL-1070 Technical Reference - Page 282
Esc W 0, Esc SO, Esc t, EPSON - 19
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
2001/10/02 • When you specify a value for n you may also use the character codes for '0' and '1' (48 and 49) instead of 0 and 1. • Only Esc W 0 can be used to cancel double-width printing mode set using the Esc W 1 instruction. • Esc W 0 cancels double-width printing mode set using the Esc W 1 instruction, the SO control code or the Esc SO instruction. LPRINT CHR$(27); CHR$(87); CHR$(1); 'Set double-width printing mode Select single-line double-width printing (I) SO (27) • This command turns double-width printing mode on for one line only. The subsequent line of text is printed using double-width characters and with the line spacing setting doubled. • The following commands cancel double-width printing mode set using the SO control code: LF, FF, VT, Esc W 0, DC4, and ESC @. • If the "auto LF" (automatic line feed) function has been turned on from the control panel, the carriage return control code, CR, will also cancel double-width printing mode selected with the SO control code. LPRINT CHR$(14); 'Set double-width printing mode for one line Select single-line double-width printing (II) EscSO (27)(14) • This command turns double-width printing mode on for one line only. The subsequent line of text is printed using double-width characters and with the line spacing setting doubled. • The following commands cancel double-width printing mode set using the SO escape sequence: LF, FF, VT, Esc W 0, DC4, and ESC @. • If the "auto LF" (automatic line feed) function has been turned on from the control panel, the carriage return control code, CR, will also cancel double-width printing mode selected with the Esc SO escape sequence. • This command functions exactly like the SO control code. LPRINT CHR$(27); CHR$(14); 'Set double-width printing mode for one line Cancel single-line double-width printing DC4 (20) • This control code cancels single-line double-width mode set with the SO control code or with the Esc SO escape sequence. Subsequent text is printed using normal sized characters. • The previous character pitch is restored. LPRINT CHR$(20); 'Cancel enlarged character mode set with SO Select italic mode Esc4 (27)(52) • This command enables the italic printing mode. Subsequent text is printed in italic style. • You can still use italic text even after selecting the extended character set with the Esc t command. LPRINT CHR$(27); CHR$(52); 'Italic mode Cancel italic mode Esc5 (27)(53) This command cancels the italic printing mode. Subsequent text is printed upright. LPRINT CHR$(27); CHR$(53); 'Cancel italic mode Select superscript / subscript mode EscSn (27)(83)n n • This command allows you to print superscripts or subscripts. • Set n to 0 to print subsequent text using superscript characters. • Set n to 1 to print subsequent text using subscript characters. • When you specify the value for n you may use the character codes for '0' and '1' (48 and 49) instead of 0 and 1. CHAPTER 6 EPSON - 19
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/282.png)