Brother International MFC-7400C Users Manual - English - Page 137
Using a USB Cable to Connect the MFC to the PC (Using Windows® 98, 98SE, ME and Windows® 2000 Pro...
View all Brother International MFC-7400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
23 Click OK. 24 All the drivers have been installed. Now you can print and scan. Note If you want to install PaparPort®, MFLPro, go to the CD section. (See Installing the Brother Software on page 14-27.) Using a USB Cable to Connect the MFC to the PC (Using Windows® 98, 98SE, ME and Windows® 2000 Professional Only) IMPORTANT To install the software using Windows® 2000 Professional, you must be logged on as the Administrator. Note Before you can connect the MFC to your computer, you must purchase a USB cable that is no longer than 6 feet (1.8 meters). Note If you are using a bi-directional IEEE-1284 comliant parallel cable, see Using a bi-directional IEEE-1284 compliant parallel cable to Connect the MFC to the PC on page14-2. Notice to Computer Users A small filter core and cable tie are enclosed in a vinyl bag with your MFC. PLEASE SAVE THESE PARTS. You will need them in the future if you connect the MFC to a Computer. For optimal performance, use a USB Cable with the enclosed Filter core and Cable tie. When you use a Computer with your MFC, please attach the enclosed Filter core to a USB Cable. 1 Attach the cable tie 2 inches or less from the end of the USB Cable that will be connected to the MFC. 2 Attach the filter core between the USB Cable Connector and the Cable Tie by pressing until you hear a click. Filter Core USB Cable Cable Tie Filter Core Cable Tie To MFC 2 inches connector USB Cable S E T T I N G U P T H E M F C A N D P C T O W O R K T O G E T H E R 14 - 17