Brother International MFC-7400C Users Manual - English - Page 46

Alternating Displays When you see alternating displays, the LCD sometimes alternates between the currently selected option, and a help message giving brief instructions about how to proceed. The display you'll probably see most often is shown below. It appears when you place an original in the ADF to tell you that you can dial a number and send a fax, or you can make a copy. FAX: NO. & START COPY: PRESS COPY Function Selection Table You can probably perform most of these programming settings without the Owner's Manual. To help you understand the function selections, options and settings that are found in the MFC programs, use the Function Selection Table below. 1. Fax Functions 1. INITIAL SETUP Function Description Factory Setting Page 1. DATE/TIME Enter date and time for the 2001 1/1 00:00 5-1 LCD display and heading on fax transmissions. 2. STATION ID Program your name, fax - 5-1 number and telephone number to appear on each transmitted page. 3. BEEPER Adjust volume level of beeper. LOW 5-3 4. VOLUME AMPLIFY For the hearing-impaired, OFF 5-5 you can set the volume to the VOL AMPLIFY:ON setting on a permanent or temporary basis. 5. AUTO DAYLIGHT Changes for Daylight OFF 5-6 Savings Time automatically. 6. TONE/PULSE Selects dialing mode. (For Canada only) TONE 5-3 7. LOCAL LANGUAGE (For Canada only) Allows you to change the LCD Language to French. ENGLISH See French Manual 4-2 ON-SCREEN PROGRAMMING