Brother International MFC-7400C Users Manual - English - Page 155

Loading Paper You can use plain paper, coated paper, transparencies, glossy paper, envelopes and organizer (K, L) in the multi-purpose sheet feeder. (See Chapter 3 for more information about paper types.) 1 Open the control panel cover by pulling it toward, you then lift the top cover toward the back. When you want to print on regular paper, keep the purple paper thickness adjustment lever up. When you want to use thick paper, press the lever down. Then, close the top cover and the control panel cover. (For regular paper) (For thick paper) Purple Paper Thickness Adjustment Lever 2 Remove any paper in the Feeder, and load the new paper. Fan the stack of paper before loading. 3 Load the paper stack with the printing (coated) side facing up. Adjust the paper guide. Make sure the paper is stacked below the arrow. You can load up to approximately 100 sheets of 20 lb (75g/m2) plain paper. Note If you see ink smudges on the top center of the printed pages, press the purple thickness adjustment lever down. Simultaneous Printing/Fax Your MFC can print data from your computer while sending or receiving a fax, or while scanning information into the computer. However, when the MFC is copying or receiving a fax on paper, it pauses the PC printing operation, and resumes when copying or fax receiving is complete. Fax sending will continue during PC printing. U S I N G T H E M F C A S A P R I N T E R 15 - 3