Brother International MFC 9420CN Users Manual - English - Page 158

OPC belt cartridge, Replace OPC belt cartridge message, Replacing the OPC belt cartridge (OP-4CL)

Page 158 highlights

OPC belt cartridge Replace OPC belt cartridge message When the OPC belt cartridge runs out, the following message appears on the LCD. When you see this message, you must replace the OPC belt cartridge: Replace OPC Belt Troubleshooting and routine maintenance 4 To release the lock, push the green belt cartridge lock levers on both sides inwards. WARNING ■ Do not touch the green film of the OPC belt cartridge. If you touch it, it could degrade print quality. ■ Do not expose the OPC belt cartridge to bright room light or sunlight (a light source of 74.3 footcandles or 800 lux) for more than two minutes to avoid damaging the belt. ■ Damage caused by improper handling of the OPC belt cartridge may void your warranty. Replacing the OPC belt cartridge (OP-4CL) 1 Turn off the machine's power switch. 2 Open the scanner unit. 3 Open the inside cover so that it latches under the scanner unit. 5 Remove the OPC belt cartridge from the machine. 6 Remove the tension release pins from both sides of the new OPC belt cartridge. C C - 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195

Troubleshooting and routine maintenance
C - 33
C
OPC belt cartridge
Replace OPC belt cartridge message
When the OPC belt cartridge runs out, the
following message appears on the LCD.
When you see this message, you must
replace the OPC belt cartridge:
Replacing the OPC belt cartridge
(OP-4CL)
1
Turn off the machine’s power switch.
2
Open the scanner unit.
3
Open the inside cover so that it latches
under the scanner unit.
4
To release the lock, push the green belt
cartridge lock levers on both sides
inwards.
5
Remove the OPC belt cartridge from the
machine.
6
Remove the tension release pins from
both sides of the new OPC belt
cartridge.
WARNING
Do not touch the green film of the OPC
belt cartridge. If you touch it, it could
degrade print quality.
Do not expose the OPC belt cartridge
to bright room light or sunlight (a light
source of 74.3 footcandles or 800 lux)
for more than two minutes to avoid
damaging the belt.
Damage caused by improper handling
of the OPC belt cartridge may void your
warranty.
Replace OPC Belt