Brother International MFC 9420CN Users Manual - English - Page 25
Loading paper and documents, Acceptable paper and other media, Recommended paper - paper jam
UPC - 012502614074
View all Brother International MFC 9420CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2 Loading paper and documents Acceptable paper and other media Recommended paper The recommended paper for this machine is: Xerox 4200, Hammermill Laserprint or equivalent ■ To get the best output quality and to avoid any damage, use smooth white paper. ■ Before you buy a lot of paper, please test some to make sure that the paper is suitable. ■ Use neutral paper. Do not use acidic or alkaline paper. ■ Print quality will vary depending on the paper being used. CAUTION Do not load envelopes, transparencies, labels or thick paper (more than 28 lb or 105 g/m2) into the optional lower tray unit. It may cause paper jams. Type and size of paper The machine loads paper from the installed standard paper tray or optional lower tray. Standard paper tray Since the standard paper tray is a universal type, you can use any of the paper types and sizes (one paper type and size at a time) listed in the table in Paper capacity of the paper trays on page 2-2. The tray can hold up to 250 sheets of paper (20 lb or 80 g/m2) or up to 15 envelopes (paper can be loaded up to the top line of the maximum paper mark on the sliding paper width guide). Optional lower tray (LT-27CL) The optional lower tray can hold up to 530 sheets of Letter/A4 paper (20 lb or 80 g/m2). The maximum capacity is 1.76 in. (44 mm) paper height. The names for the paper trays in the machine driver and this Guide are as follows: Tray and optional unit Standard paper tray Optional lower tray Name Tray 1 Tray 2 2 - 1