Brother International MFC 9420CN Users Manual - English - Page 164
Replacing the transfer roller, roller onto the shafts and place the roller
UPC - 012502614074
View all Brother International MFC 9420CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Replacing the transfer roller 1 Turn off the machine's power switch. 2 Open the back cover of the machine. Troubleshooting and routine maintenance 5 Put in the new transfer roller by holding the lock levers of the transfer roller and adjusting the angle of the transfer roller lever shafts (both sides) to match the transfer unit grooves. Put the transfer roller onto the shafts and place the roller onto the springs as shown below: 3 Release the transfer roller lock levers on the right and left-hand sides, and then lift the levers to release the transfer roller. Lock levers Transfer roller shaft Spring 4 Take out the transfer roller by gently pulling the right-hand side up and sliding the transfer roller to the right. 6 Push the lock levers down to lock the C transfer roller into place. 7 Close the back cover. 8 Turn the machine's power switch back on. C - 39