Brother International MFC 9420CN Users Manual - English - Page 43
Sleep Time, Mode Timer - fuser
UPC - 012502614074
View all Brother International MFC 9420CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3 Sleep Time Setting the Sleep Time reduces power consumption by turning off the fuser inside the machine while it is idle. You can choose how long the machine is idle (from 00 to 99 minutes) before it goes into sleep mode. The timer is automatically reset when the machine receives a Fax or PC data or makes a copy. The factory setting is 30 minutes. While the machine is in sleep mode you will see Sleep on the LCD. If you try to print or copy in sleep mode, there will be a short delay while the fuser warms up to its working temperature. 1 Press Menu/Set, 1, 6, 2. Ecology 2.Sleep Time 2 Use the dial pad to enter the length of time the machine is idle before it goes into sleep mode (00 to 99). Press Menu/Set. 3 Press Stop/Exit. Note ■ If you want to turn off sleep mode, press Start (either Black or Color) and Options simultaneously in Step 2. ■ If the machine is in Sleep Mode when you change the Sleep Time, the new setting will take effect the next time the machine copies, prints or is turned off and on. Mode Timer The machine has three temporary mode keys on the control panel: Fax, Scan and Copy. You can change the number of seconds or minutes the machine takes after the last Scan or Copy operation before it returns to Fax mode. If you select Off, the machine stays in the mode you used last. 1 Press Menu/Set, 1, 1. General Setup 1.Mode Timer 2 Press ▲ or ▼ to select 0 Sec, 30 Secs, 1 Min, 2 Mins, 5 Mins or Off. Press Menu/Set. 3 Press Stop/Exit. 3 - 8