Canon imageFORMULA ScanFront 400 Instruction Manual - Page 137
SNMPv3 Settings, SNMP Service, SNMP Agent, Set to [ON] when using SNMPv3.
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
To register an SNMP trap, press [Edit] - [New], and configure the transmission destination for the SNMP trap and its community name. Chapter 5 Administrator Settings IMPORTANT The [SNMP Agent] and [SNMP Security-Auth trap] settings are common to SNMPv1 and SNMPv3. Changes to these settings in SNMPv1 are reflected in SNMPv3, and vice versa. Other settings can be configured independently for SNMPv1 and SNMPv3. SNMP Service Set to [ON] when using SNMPv3. SNMP Agent b SNMPv3 Settings Enter the installation location of the SNMP agent. IMPORTANT The same setting is reflected in SNMPv1. SNMPv3 enables network device management with strong security capabilities. 137
137
Chapter 5
Administrator Settings
To register an SNMP trap, press [Edit] - [New], and
configure the transmission destination for the SNMP trap
and its community name.
b
SNMPv3 Settings
SNMPv3 enables network device management with strong
security capabilities.
IMPORTANT
The [SNMP Agent] and [SNMP Security-Auth trap] settings are
common to SNMPv1 and SNMPv3. Changes to these settings
in SNMPv1 are reflected in SNMPv3, and vice versa. Other
settings can be configured independently for SNMPv1 and
SNMPv3.
SNMP Service
Set to [ON] when using SNMPv3.
SNMP Agent
Enter the installation location of the SNMP agent.
IMPORTANT
The same setting is reflected in SNMPv1.