Canon imageFORMULA ScanFront 400 Instruction Manual - Page 42

❏ Business Card Size Width: 1.97" (50 mm) and above Length: 3.35" (85 mm) and above Thickness 101.33 lb Cover (380 g/m2) and below IMPORTANT • We recommend placing business cards horizontally. Vertically placed business cards may not feed properly depending on their size. • If the stack of business cards that you placed is not fed properly, reduce the number business cards. • Business cards may sometimes be stacked in the wrong order when they are ejected, depending on the size and thickness of the business cards, and the orientation that they are loaded. ❏ Card (plastic) Size 2.12" × 3.37" (54 mm × 86 mm) (ISO standard) Card thickness 0.055" (1.4 mm) or smaller Orientation Horizontal feeding only Embossed cards Embossed cards can be scanned. Loading capacity 10 cards (non-embossed), 1 card (embossed) Chapter 3 Handling CAUTION • When scanning cards, place them to be fed horizontally. If you place cards to be fed vertically, they may not be ejected properly, and cards that get jammed may be damaged when you remove them. • Embossed cards may not be able to be scanned correctly, depending on the type of embossment. • When scanning cards, set [Double feed detection by Ultrasonic] to [OFF] in the Detailed Settings screen. (See p. 88.) ❏ Passport Size 3.46" × 4.92" (88 mm × 125 mm) (ISO standard) Insert the passport into an optional carrier sheet (passport type) in an opened state. Thickness 0.236" (6 mm) or less (including carrier sheet) 42