Canon imageFORMULA ScanFront 400 Instruction Manual - Page 16
CAUTION, authorized Canon dealer or service representative
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 1 Before Use ■ The supplied power cord set is intended for use with this scanner only. Do not use it with other electronic equipment. In addition, do not use power cord sets other than the one supplied with the scanner. Doing so may result in fire or electric shock. ■ Never connect the power cord when your hands are wet. ■ Do not connect the scanner to a multiplug power strip. ■ Do not knot or coil the power cord, as this may result in a fire or electric shock. When connecting the power cord, make sure that the power plug is securely and completely inserted into the power outlet. ■ Never try to take the scanner apart or modify it in any way. ■ Never try to take the AC adapter apart or modify it in any way, as this is dangerous and may lead to a fire or electric shock. ■ Do not use flammable aerosol sprays near the scanner. ■ When cleaning the scanner, turn the power OFF and disconnect the power cord from the power supply. ■ Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances. ■ If the scanner makes strange noises, or gives off, smoke, heat, or strange odors, or the scanner does not function or other abnormalities occur when you use the machine, immediately turn the power OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative for further information. ■ Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever become damaged, immediately turn the power OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced. ■ Before moving the scanner, make sure to turn the power OFF, and disconnect the power plug from the power outlet. CAUTION ■ Do not install the scanner on a surface that is unstable or tilted, or in an area subject to excessive vibrations, as this may cause the scanner to fall, resulting in personal injury or damage to the scanner. ■ Do not block the ventilation openings. Doing so could cause the scanner to overheat, creating a risk of fire. 16