Canon imageFORMULA ScanFront 400 Instruction Manual - Page 53

Chapter 3 Handling 2. Remove the scanned documents from the document eject tray, and any documents remaining in the document feed tray. 3. Pull the lock lever toward you and then fully open the panel unit. Hint • If you want to continue scanning, clear the document first before touching the screen. After you reset the cleared document, press [Continue] to resume scanning. • To re-scan the document from the previewed page, set the document in the scanner, starting with the page displayed in the preview, and press [DISCARD & CONTINUE]. • To save the previewed image as a scanned image and then scan the remaining documents, set the remaining documents in the scanner and press [SAVE & CONTINUE]. • If you press [Complete], the scanned images up until the paper jam or double feed error are saved and scanning completes. The display switches to the Send screen. • If you press [Cancel], the scanned images are canceled, and the display returns to the previous screen. IMPORTANT When the message above is displayed and the scanner transitions to Low Power Mode, all of the data scanned up until that point is discarded. (See "Adjust the wait time until the Low Power Mode." on p. 155.) Lock lever 4. Pull out the jammed document in the direction that seems the easiest to remove it. 53