Canon imageFORMULA ScanFront 400 Instruction Manual - Page 144

Chapter 5 Administrator Settings IMPORTANT For details on the strings to enter for the search base, contact your system administrator. • Host Name(Address) Enter the host name or IP address of the authentication server. Hint • If you select [Active Directory] as the [Authentication Method], enter the full domain name (FQDN) instead of the IP address. It will not work with an IP address. • Press [Connection test] to check the connection for the entered host name. • Domain Enter a domain name supported by Active Directory. • Port number Enter the port number used for the LDAP protocol. The standard port number is 389. Hint The standard port number will be 636 when [Use SSL] is enabled. • User name When using the authentication server as an address book server, enter a user name for referring to e-mail addresses. • Register / Change password When you want to set a password for the above user, select the check box and then enter a password. Hint Changing the password updates the password information saved on the ScanFront, but does not alter the password registered on the server. When server authentication is set, a list box for selecting device authentication or server authentication is added to the login screen. ❏ Address Book Server When using an address book server (LDAP server), select the server and enter all of the settings if the authentication server and address book server are different. For details on the settings, see "Authentication Server" on p. 143. Hint When using an address book server that is different from the authentication server, select [Anonymous] for [Authentication Method]. 144