Canon imageFORMULA ScanFront 400 Instruction Manual - Page 148
Backing Up All Settings, Restoring All Settings, Press [Backup All Settings].
![]() |
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
❏ Backing Up All Settings You can back up the ScanFront settings. IMPORTANT The following settings are not included in the backup data because they are specific to the ScanFront. • IP address • Device name • Touch panel adjustment values 1. Press [Backup All Settings]. The Backup screen appears. 2. Enter the save location information. Chapter 5 Administrator Settings 3. Press [OK]. Backing up starts. When the process is complete, a message appears. 4. Press [Yes]. ❏ Restoring All Settings You can restore backed up data to the ScanFront. IMPORTANT Set [Allow remote operation] (see p. 156) to [ON] before performing restoration. If this is not set to [ON] before restoration, information for certain settings, including the language, time zone, and SNMP, will not be applied. 1. Press [Restore All Settings]. The Restore screen appears. 2. Enter the save location information, and then specify the backed up data. Hint • Press [Connection test] to check the connection for the entered host name. • Press [Browse] to display the Shared folder screen and then specify the host and shared folder. 148
![](/manual_guide/products/canon-imageformula-scanfront-400-instruction-manual-87e22fe/148.png)