Canon imageFORMULA ScanFront 400 Instruction Manual - Page 56

Chapter 4 Operating Procedures 1. Flow of Scanner Operations The procedure and screen transitions for the process from turning the scanner ON, to sending an image file are as follows. For descriptions of the various settings, refer to the appropriate reference pages. Turn the power ON (See p. 57.) No user is registered * When no user is registered and only the Shared Address Book and Shared Job Button are used Users are registered (device/server authentication) Login screen (See p. 59.) * Set the screen that appears after login in the user settings. * When you use server authentication, the user that logged in is registered automatically. Administrator Settings screen (See p. 105.) User Settings screen (See p. 160.) Home screen (See p. 63.) Address selection screen Job Button screen (See p. 64.) * Users restricted by [Use only Job Buttons] in the function restrictions cannot scan from the Home screen. Password setting screen (See p. 69.) (See p. 151 and p. 161.) * The administrator password is Scan / Send Settings screen (See p. 85.) Scanning starts immediately after a job button is pressed. registered in the Administrator Settings screen, and the user password is registered in the User Settings screen. Scan (The process after scanning differs depending on the Send Settings) (See p. 98.) * Send Settings are also applied to job buttons. Scanning finishes (A document confirmation message appears) (See p. 75.) The image is sent without the address being confirmed. Send/Image Confirmation screen (See p. 75.) Address Confirmation screen (See p. 77.) The document and image are not checked After scanning of the document ends, the image is sent as is and the process ends. Send (The screen displayed after sending differs depending on the Send Settings) (See p. 98.) Home screen Job Button screen Login screen 56