Canon imageFORMULA ScanFront 400 Instruction Manual - Page 49
Placing a Carrier Sheet, Settings screen.
![]() |
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
CAUTION • Place the cards one at a time. • When scanning cards, place them to be fed horizontally. If you place cards to be fed vertically, they may not be ejected properly, and cards that get jammed may be damaged when you remove them. • When scanning cards, set [Double feed detection by Ultrasonic] to [OFF] in the Detailed Settings screen. (See p. 89.) • Pull the lock lever and open the panel unit before removing a placed card. Inserting a finger into the scanner while the panel unit is closed may result in an injury. Chapter 3 Handling ❏ Placing a Carrier Sheet When scanning a document that requires extra protection from damage, insert the document into an optional carrier sheet before placing it in the scanner. 1. Set [Document type] to [Carrier sheet] in the Detailed Settings screen. (See p. 94.) 2. Insert the document into the carrier sheet. Lock lever Hint When scanning cards without embossing, up to 10 cards can be placed on the scanner at the same time. In such cases, set [Document type] to [Extra-thick paper/plastic card] in the Detailed Settings screen. (See p. 94.) 3. Load the document with the page you want to scan facing down. After placing the document, align the document guides with both edges of the document. CAUTION • If the carrier sheet or passport is not loaded properly, you may get a document jam or not get a scan image as intended • When [Carrier sheet] is selected, [Double feed detection by Ultrasonic] will be set to [OFF] automatically. IMPORTANT • Insert documents straight into the center of the carrier sheet. Proper scanning will not be possible if the document is too close to either side, tilted, or protruding from the carrier sheet. 49
![](/manual_guide/products/canon-imageformula-scanfront-400-instruction-manual-87e22fe/49.png)