Canon imageFORMULA ScanFront 400 Instruction Manual - Page 35
Network Setting, Select the setting item to con
![]() |
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. Select the setting item to configure. Chapter 2 ScanFront Setup ❏ Network Setting Configure the device name and IP address used for connecting the ScanFront to a network with [Network Setting] of the Device Configuration screen. IMPORTANT • Configure network settings while the network cable is connected to the scanner. If the network cable is not connected to the scanner, you will not be able to verify or modify settings in the network settings screen. • The device name is the name for the scanner used on the network. When changing this setting, make sure to select a unique name that is different from those of all other devices. • The device name can be a combination of letters (A-Z, a-z), numbers (0-9), and hyphens (-) up to 15 characters long. • The device name must begin with a letter. You cannot end the device name with a hyphen. • When a DHCP server is not used to assign IP addresses, clear the [DHCP server Enable] check box, and enter a fixed address. For details, contact your network administrator. 35
![](/manual_guide/products/canon-imageformula-scanfront-400-instruction-manual-87e22fe/35.png)