Cisco ISE Software Configuration Guide - Page 1
Cisco ISE - Line Card ISE Manual
UPC - 746320730097
View all Cisco ISE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers This feature module describes the software configuration for the Cisco 4-Port ATM Internet Services Engine (ISE) line cards in the Cisco 12000 Series Router. The line card comes in two variations: OC-12c/STM-4c and OC-3c/STM-1; otherwise, the features are the same on both cards. Feature History for the 4-Port ATM ISE Line Card Release 12.0(25)S 12.0(26)S2 12.0(27)S1 Modification The 4-Port OC-12c/STM-4c ATM ISE line card was introduced. The 4-Port OC-3c/STM-1 ATM ISE line card was integrated into 12.0(26)S. The 4-Port OC-3c/STM-1 ATM ISE line card was introduced. AToM, Layer 2/Layer 3 features on a single port and enhanced QoS policing features were introduced. Finding Support Information for Platforms and Cisco IOS Software Images Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear. Contents • Prerequisites for the 4-Port ATM ISE Line Card, page 2 • Restrictions for the 4-Port ATM ISE Line Card, page 2 • Information About the 4-Port ATM ISE Line Card, page 3 • How to Perform a Basic Configuration of the 4-Port ATM ISE Line Card, page 5 • How to Configure Layer 3 Terminated VCs on the 4-Port ATM ISE Line Card, page 8 • How to Configure AToM VCs on the 4-Port ATM ISE Line Card, page 35 • Troubleshooting ATM Errors on the 4-Port ATM ISE Line Card, page 76 Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Copyright © 2004 Cisco Systems, Inc. All rights reserved.