Cisco ISE Software Configuration Guide - Page 55

Configuring Cell Packing over MPLS on PVCs

Get Cisco ISE - Line Card ISE PDF manuals and user guides
UPC - 746320730097
View all Cisco ISE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers How to Configure AToM VCs on the 4-Port ATM ISE Line Card Configuring Cell Packing over MPLS on PVCs This task illustrates the configuration of VBR-RT traffic shaping in cell packing over MPLS VC mode. SUMMARY STEPS 1. enable 2. configure terminal 3. policy-map policy-map-name 4. class class-default 5. queue-limit number-of-cells cells 6. exit 7. exit 8. interface atmslot/port 9. atm clock internal 10. atm mcpt-timers timer1-timeout timer2-timeout timer3-timeout 11. pvc vpi/vci l2transport 12. encapsulation aal0 13. cell-packing cells mcpt-timer timer 14. vbr-rt pcr scr burst 15. service-policy output policy-map-name 16. xconnect peer-router-id vcid encapsulation mpls DETAILED STEPS Command or Action Step 1 enable Step 2 Example: Router> enable configure terminal Step 3 Example: Router# configure terminal policy-map policy-map-name Step 4 Example: Router(config)# policy-map out_vbr-rt class class-default Example: Router(config-pmap)# class class-default Purpose Enables privileged EXEC mode. • Enter your password if prompted. Enters global configuration mode. Specifies the name of the service policy to configure with the shaping queue size. Specifies to configure the default class. Cisco IOS Release 12.0(27)S 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers
How to Configure AToM VCs on the 4-Port ATM ISE Line Card
55
Cisco IOS Release 12.0(27)S
Configuring Cell Packing over MPLS on PVCs
This task illustrates the configuration of VBR-RT traffic shaping in cell packing over MPLS VC mode.
SUMMARY STEPS
1.
enable
2.
configure
terminal
3.
policy-map
policy-map-name
4.
class class-default
5.
queue-limit
number-of-cells
cells
6.
exit
7.
exit
8.
interface atm
slot/port
9.
atm clock internal
10.
atm mcpt-timers
timer1-timeout timer2-timeout timer3-timeout
11.
pvc
vpi/vci
l2transport
12.
encapsulation aal0
13.
cell-packing
cells
mcpt-timer
timer
14.
vbr-rt
pcr scr burst
15.
service-policy output
policy-map-name
16.
xconnect
peer-router-id vcid
encapsulation mpls
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
policy-map
policy-map-name
Example:
Router(config)# policy-map out_vbr-rt
Specifies the name of the service policy to configure with
the shaping queue size.
Step 4
class class-default
Example:
Router(config-pmap)# class class-default
Specifies to configure the default class.