Cisco ISE Software Configuration Guide - Page 70
class class-default, set mpls experimental
UPC - 746320730097
View all Cisco ISE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
How to Configure AToM VCs on the 4-Port ATM ISE Line Card Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers DETAILED STEPS 7. class clp0 8. police rate scr cps atm-mbs mbs cells conform-action transmit exceed-action transmit 9. exit 10. exit 11. policy-map vbr3 12. class class-default 13. set mpls experimental mpls-exp-value 14. policy rate pcr cps delay-tolerance cdvt conform-action transmit exceed-action drop 15. service-policy child-vbr3 Command or Action Step 1 enable Step 2 Example: Router> enable configure terminal Step 3 Example: Router# configure terminal class-map match-all class-map-name Step 4 Example: Router(config)# class-map match-all cpl0 match not match-criteria Step 5 Example: Router(config-cmap)# match not atm clp exit Step 6 Example: Router(config-cmap)# exit policy-map child-vbr3 Step 7 Example: Router(config)# policy-map child-vbr1 class class-map-name Example: Router(config-pmap)# class clp0 Purpose Enables privileged EXEC mode. • Enter your password if prompted. Enters global configuration mode. Specifies the user-defined name of the traffic class. Use match-all to specify a logical AND operator for all matching statements under this traffic class. Specifies a single match criterion value to use as an unsuccessful match criterion. Exits class-map mode. Specifies the name of the child service policy to configure. Specifies to configure the class defined in Step 3. Cisco IOS Release 12.0(27)S 70