Cisco ISE Software Configuration Guide - Page 60
Configuring AAL5 over MPLS on PVCs
![]() |
UPC - 746320730097
View all Cisco ISE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
How to Configure AToM VCs on the 4-Port ATM ISE Line Card Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers Router(config-pmap)# exit Router(config)# interface atm1/0 Router(config)# atm clock internal Router(config-if)# atm pvp 100 l2transport Router(config-atm-l2trans-pvc)# cell-packing 10 mcpt-timer 1 Router(config-if-vc)# vbr-nrt 3000 2000 200 Router(config-pmap-c)# service-policy output out_vbr-nrt Router(config-atm-vc)# xconnect 2.2.2.2. 121 encapsulation mpls Configuring AAL5 over MPLS on PVCs This task illustrates the configuration of VBR-RT traffic shaping in AAL5 over MPLS VC mode. SUMMARY STEPS 1. enable 2. configure terminal 3. policy-map policy-map-name 4. class class-default 5. queue-limit number-of-cells cells 6. exit 7. exit 8. interface atmslot/port 9. atm clock internal 10. pvc vpi/vci l2transport 11. encapsulation aal5 12. vbr-rt pcr scr burst 13. service-policy output policy-map-name 14. xconnect peer-router-id vcid encapsulation mpls DETAILED STEPS Command or Action Step 1 enable Step 2 Example: Router> enable configure terminal Example: Router# configure terminal Purpose Enables privileged EXEC mode. • Enter your password if prompted. Enters global configuration mode. Cisco IOS Release 12.0(27)S 60
![](/manual_guide/products/cisco-ise-software-configuration-guide-4ef230b/60.png)