Cisco ISE Software Configuration Guide - Page 91

Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers Additional References Additional References The following sections provide references related to the 4-port ATM ISE line card. Related Documents Related Topic Hardware installation New software features FPGA upgrade Software configuration MPLS MPLS AToM MQC Document Title 4-Port ATM ISE Line Card Installation and Configuration Release Notes for Cisco 12000 Series Routers for Cisco IOS Release 12.0 S Field Diagnostics for the Cisco 12000 Series Internet Router Cisco IOS Release 12.0 Wide-Area Networking Configuration Guide Multiprotocol Label Switching on Cisco Routers MPLS Virtual Private Networks Any Transport over MPLS Modular Quality of Service Command-Line Interface You can find additional information in the installation and configuration guide for your Cisco 12000 Series Router and in the Cisco IOS Release 12.0 documentation set. Standards Standards I.362, I.363 UNI 3.x, I.610 UNI 3.x ATM 4.0 Title AAL5 reassembly and segmentation F4 and F5 flows of OAM cells and OAM management Interim Local Management Interface (ILMI) ATM Forum Traffic Management Specification 4.0 MIBs In addition to industry-standard Simple Network Management Protocol (SNMP) and other Management Information Bases (MIBs) supported on the Cisco 12000 Series Router, the 4-Port ATM ISE line card supports the following: • ATM-MIB • CISCO-AAL5-MIB • CISCO-ATM-EXT-MIB • IF-MIB • SONET-MIB • CISCO-IETF-ATM2-PVCTRAP-MIB • MPLS-TE-MIB • CISCO-QUEUE-MIB Cisco IOS Release 12.0(27)S 91