Cisco ISE Software Configuration Guide - Page 33
VC Bundle Configuration Using MPLS and Service Policies Example - lab
UPC - 746320730097
View all Cisco ISE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers How to Configure Layer 3 Terminated VCs on the 4-Port ATM ISE Line Card pvc-bundle 1/105 precedence 5 pvc-bundle 1/104 precedence 4 pvc-bundle 1/103 precedence 3 pvc-bundle 1/102 precedence 2 pvc-bundle 1/101 precedence 1 pvc-bundle 1/100 precedence other ! VC Bundle Configuration Using MPLS and Service Policies Example This example configures a VC bundle with three member VCs on a MPLS-enabled subinterface. Each of the bundle members has the same traffic policy attached. interface ATM5/1.1 point-to-point ip address 1.1.2.1 255.255.255.0 no ip directed-broadcast no atm enable-ilmi-trap bundle b511 oam retry 3 5 1 oam-bundle manage pvc-bundle 1/103 service-policy out high mpls experimental 5-7 pvc-bundle 1/102 service-policy out high mpls experimental 2-4 pvc-bundle 1/101 service-policy out high mpls experimental 0-1 ! tag-switching ip ! VC Bundle Configuration Using a VC Class Example This example shows how to configure a VC bundle using VC classes. interface ATM2/1.1 point-to-point ip address 2.1.2.1 255.255.255.0 no ip directed-broadcast no atm enable-ilmi-trap bundle b211 pvc-bundle lab-control 0/33 class-vc control-class pvc-bundle lab-premium 0/34 class-vc premium-class vbr-nrt 100000 100000 8000 mpls experimental 0-6 pvc-bundle lab-priority 0/35 class-vc priority-class pvc-bundle lab-basic 0/36 class-vc basic-class ! tag-switching ip Cisco IOS Release 12.0(27)S 33