D-Link DIS-200G Emulator - Page 100
RADIUS, RADIUS Global Settings
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch RADIUS RADIUS Global Settings This window is used to view and configure the RADIUS global settings. To view the following window, click Security > RADIUS > RADIUS Global Settings, as shown below: Figure 8-4 RADIUS Global Settings window The fields that can be configured are described below: Parameter Dead Time Description Enter the dead time value here. This value must be between 1 and 1440 minutes. By default, this value is 0 minutes. When this option is 0, the unresponsive server will not be marked as dead. This setting can be used to improve the authentication processing time by setting the dead time to skip the unresponsive server host entries. When the system performs authentication with the authentication server, it attempts one server at a time. If the attempted server does not respond, the system will attempt the next server. When the system finds a server does not respond, it will mark the server as down, start a dead time timer, and skip them in authentication of the following requests until expiration of the dead time. Click the Apply button to accept the changes made. RADIUS Server Settings This window is used to view and configure the RADIUS server settings. To view the following window, click Security > RADIUS > RADIUS Server Settings, as shown below: Figure 8-5 RADIUS Server Settings window 93