D-Link DIS-200G Emulator - Page 30
Jumbo Frame, System > Port Configuration > Jumbo Frame, From Port / To Port
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Jumbo Frame This window is used to view and configure the Jumbo Frame size and settings. The Switch supports jumbo frames. Jumbo frames are Ethernet frames with more than 1,518 bytes of payload. The Switch supports jumbo frames with a maximum frame size of up to 9600 bytes. To view the following window, click System > Port Configuration > Jumbo Frame, as shown below: Figure 4-6 Jumbo Frame window The fields that can be configured are described below: Parameter From Port / To Port Maximum Receive Frame Size Description Select the appropriate port range used for the configuration here. Enter the maximum receive frame size value here. This value must be between 1518 and 9600 bytes. By default, this value is 1518 bytes. Click the Apply button to accept the changes made. 23
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/30.png)