D-Link DIS-200G Emulator - Page 118
DDM TX Power Threshold Settings, OAM > DDM > DDM TX Power Threshold Settings, Action, Power Unit
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch DDM TX Power Threshold Settings This window is used to configure the threshold of TX power for specific ports on the Switch. To view the following window, click OAM > DDM > DDM TX Power Threshold Settings, as show below: Figure 9-6 DDM TX Power Threshold Settings window The fields that can be configured are described below: Parameter Port Action Type Power Unit Value Description Select the port used for the configuration here. Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of TX power threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Select the power unit here. Options to choose from are mW and dBm. Enter the threshold value. When selecting mW in the Power Unit drop-down list, this value must be between 0 and 6.5535. When selecting dBm in the Power Unit drop-down list, this value must be between -40 and 8.1647. Click the Apply button to accept the changes madeDDM RX Power Threshold Settings DDM RX Power Threshold Settings This window is used to configure the threshold of RX power for specific ports on the Switch. To view the following window, click OAM > DDM > DDM RX Power Threshold Settings, as show below: Figure 9-7 DDM RX Power Threshold Settings window 108