D-Link DIS-200G Emulator - Page 98

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Port Security Port Settings This window is used to view and configure the port security port settings. To view the following window, click Security > Port Security > Port Security Port Settings, as shown below: Figure 8-2 Port Security Port Settings window The fields that can be configured are described below: Parameter From Port / To Port State Maximum Violation Action Aging Time Description Select the appropriate port range used for the configuration here. Select to enable or disable the port security feature on the port(s) specified. Enter the maximum number of secure MAC addresses that will be allowed on the port(s) specified. This value must be between 1 and 64. By default, this value is 32. Select the violation action that will be taken here. Options to choose from are Protect, Restrict, and Shutdown. Selecting Protect specifies to drop all packets from the insecure hosts at the port- security process level, but does not increment the securityviolation count. Selecting Restrict specifies to drop all packets from the insecure hosts at the port-security process level and increments the security-violation count and record the system log. Selecting Shutdown specifies to shut down the port if there is a security violation and record the system log. Enter the aging time value used for auto-learned dynamic secured addresses on the specified port here. This value must be between 0 and 1440 minutes. Click the Apply button to accept the changes made. 91