D-Link DIS-200G Emulator - Page 73
Voice VLAN OUI, L2 Features > VLAN > Voice VLAN > Voice VLAN Device
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Voice VLAN OUI This window is used to configure the user-defined voice traffic's OUI. The OUI is used to identify the voice traffic. There are a number of pre-defined OUIs. The user can further define the user-defined OUIs if needed. The user-defined OUI cannot be the same as the pre-defined OUI. To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN OUI, as show below: Figure 6-33 Voice VLAN OUI window The fields that can be configured are described below: Parameter OUI Address Mask Description Description Enter the OUI MAC address. Enter the OUI MAC address matching bitmask. Enter the description for the user-defined OUI with a maximum of 32 characters. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Voice VLAN Device This window is used to show voice devices that are connected to the ports. The start time is the time when the device is detected on this port, the activate time is the latest time saw the device sending the traffic. To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Device, as show below: Figure 6-34 Voice VLAN Device window 66
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/73.png)