D-Link DIS-200G Emulator - Page 28
IPv6 Interface, Port Configuration, Port Settings
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch IPv6 Interface This window is used to view and configure the IPv6 interface settings. To view the following window, click System > System Information Settings > IPv6 Interface, as shown below: Figure 4-4 IPv6 Interface window The fields that can be configured are described below: Parameter IPv6 State Static IPv6 Address / Mask Description Click to enable or disable the IPv6 feature. When state is enabled, IPv6 link-local address will assigned to management VLAN automatically. If state is disabled and static IPv6 address is not set, the IPv6 feature will be disabled on switch. Enter the IPv6 address and submask for management interface here. Click the Apply button to accept the changes made. Port Configuration Port Settings This window is used to view and configure the Switch's port settings. To view the following window, click System > Port Configuration > Port Settings, as shown below: Figure 4-5 Port Settings window 21