D-Link DIS-200G Emulator - Page 64
VLAN Mode, Access, Acceptable Frame, Ingress Checking, Clone, From Port / To Port, Apply, Hybrid
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch More detailed information about the VLAN of the specific interface is displayed. Click the Back button to return to the previous window. After click the Edit button, the following window will appear. This is a dynamic window that will change when a different VLAN Mode was selected. When Access was selected as the VLAN Mode, the following page will appear. Figure 6-19 Configure VLAN Interface - Access window TThe fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking VID Clone From Port / To Port Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select this option to enable or disable the ingress checking function. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Tick this option to apply the configuration to the specified ports. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. When Hybrid was selected as the VLAN Mode, the following page will appear. Figure 6-20 Configure VLAN Interface - Hybrid window 57