D-Link DIS-200G Emulator - Page 137
Surveillance Settings, SNTP Global Settings, SNTP State, Poll Interval, Apply, SNTP Server Setting
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured in the SNTP Global Settings section are described below: Parameter SNTP State Poll Interval Description Select to enable or disable the SNTP feature here. Enter the poll interval value here. The range is from 30 to 99999 seconds. By default, this value is 720 seconds. Click the Apply button to accept the changes made. The fields that can be configured in the SNTP Server Setting section are described below: Parameter IPv4 Address Description Enter the IPv4 address of the SNTP server here. Click the Add button to add the SNTP server to the configuration. Click the Delete button to remove the SNTP server from the configuration. Surveillance Settings This window is used to display and configure the surveillance settings. The Switch has only one Surveillance VLAN. This surveillance VLAN also supports to recognize the surveillance devices, like IP Cameras (IPC) and Network Video Recorders (NVR), using the ONVIF protocol. To view the following window, click Surveillance Settings, as shown below: Figure 12-16 Surveillance Settings window 126
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/137.png)