D-Link DIS-200G Emulator - Page 60
GVRP, L2 Features > VLAN > GVRP > GVRP Port
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch GVRP GVRP Global This window is used to view and configure the GARP VLAN Registration Protocol (GVRP) global settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Global, as shown below: Figure 6-12 GVRP Global window The fields that can be configured are described below: Parameter Asymmetric VLAN State Dynamic VLAN Creation Join Time Leave Time Leave All Time Description Select this option to enable or disable the global GVRP state here. Select this option to enable or disable the dynamic VLAN creation function here. Enter the Join Time value in centiseconds. This value must be between 1 and 20 centiseconds. By default, this value is 20 centiseconds. Enter the Leave Time value in centiseconds. This value must be between 60 and 300 centiseconds. By default, this value is 60 centiseconds. Enter the Leave All Time value in centiseconds. This value must be between 1000 and 5000 centiseconds. By default, this value is 1000 centiseconds. Click the Apply button to accept the changes made. GVRP Port This window is used to view and configure the GVRP port settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Port, as shown below: 53
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/60.png)