D-Link DIS-200G Emulator - Page 81
Apply, ERPS Brief, Edit Instance, Description, R-APS Channel VLAN, Inclusion VLAN List,
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Click the Back button to discard the changes made and return to the previous window. Click the Apply button to accept the changes made. After clicking the ERPS Brief tab, the following page will appear. Figure 6-42 ERPS Brief window Guide After click the Edit Instance button, the following window will appear. Figure 6-43 ERPS (Edit Instance) window The fields that can be configured are described below: Parameter Description R-APS Channel VLAN Inclusion VLAN List MEL Description Select the checkbox and enter the ERP instance's description here This description can be up to 64 characters long. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and enter the R-APS channel VLAN's ID for the ERP instance here. The APS channel VLAN of a sub-ring instance is also the virtual channel of the sub-ring. This value must be between 1 and 4094. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and then select the switch's unit ID and the port number that will be the second ring port of the physical ring. Select the None option, from the drop-down menu, specifies that the inter- connected node is a local node endpoint of an open ring. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and enter the ring MEL value of the ERP instance here. This value must be between 0 and 7. The configured MEL value of all ring nodes that participate in the same 74