D-Link DIS-200G Emulator - Page 143
Reset, Configuration Restore from HTTP
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: Figure 12-22 Configuration Restore from HTTP window The fields that can be configured are described below: Parameter Source File Effective immediately (runningconfig) Take effect after the next boot (startup-config) Description Click the Browse button to navigate to the location of the configuration file located on the local PC. Specify this radio button to restore and overwrite the running configuration file on the Switch. Specify this radio button to restore and overwrite the start-up configuration file on the Switch. Click the Restore button to initiate the configuration restore. Configuration Restore from HTTP This window is used to initiate a configuration file backup to a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as shown below: Figure 12-23 Configuration Backup to HTTP window The fields that can be configured are described below: Parameter Description Include Username Password Specify this radio button to back up the running configuration file include username password from the Switch. Exclude Username Password Specify this radio button to back up the running configuration file exclude username password from the Switch. Click the Backup button to initiate the configuration file backup. Reset This window is used to reset the Switch's configuration to the factory default settings. 132